The FP series amplifier is a 2U mixer amplifier featuring 70V, 100V and 4-16ohm speaker outputs & 4 universal balanced XLR mic inputs with phantom power. The amplifier rated power ranges is from 60W.

There are 4 audio source selectors on the front panel. 4 Aux inputs by dual RCA type are located on the rear panel. Mic 1-4 with Vox priority selectors. The amplifier is also built-in pre-announcement chime with volume control and remote chime trigger.

The REC output for tape recorder and PRE output, AMP input for adding extra signal processor like mixer, graphic equalizer.

Volume control over Mic1-4, aux, master & overall treble/bass controls are provided.

Complete protection includes short circuit and thermal protection, current limiter and overloading.


* 2U tabletop and rack mounted design.

* Rated power output from 240W.

* 4 balanced XLR microphone inputs with phantom power and gain control.

* 4 dual RCA line inputs.

* 70V, 100V and 4-16Ω speaker terminals.

* Mic 1-4 with selectable priority over other inputs.

* Built-in chime, 2/4 tone selector and remote trigger.

* XLR balanced line output for extra power amplifier.

* REC output for tape recorder.

* PRE Output and AMP input for extra signal processor.

* Master, Mic1-4, Aux volume control, treble and bass control.

* Indications includes power and output level meter.

* AC 110V or 230V and DC 24V operation.


* DC 24V.

* Panel with/without handhold.

* Faults monitoring module, it can output short circuit signal to achieve main/spare amplifier switch.

Rated Power Output 240W
Speaker Outputs 50V, 70V, 100V & 4~16Ω
Input Sensitivity & Impedance MIC 1, 2, 3, 4: ±2.5mV/2KΩ, Balanced XLR input

AMP: 1000mV/10KΩ, Unbalanced RCA input

TAPE, CD, TUNER, LINE INPUT(AUX): 350mV/10KΩ, Unbalanced RCA input

Output Sensitivity & Impedance REC OUT: 200mV/470Ω, Unbalanced RCA output

PRE OUT: 1000mV/470Ω, Unbalanced RCA output

Overload MIC 1, 2, 3, 4: >15dB
Electromotive Force AUX: >18dB
Tone Bass: ±10dB at 100Hz, Treble: ±10dB at 10KHz
Frequency Response 50Hz~16KHz (+1dB, -3dB)
S/N Ratio MIC 1, 2, 3, 4: 66dB; AUX: 76dB
THD Less than 0.1% at 1KHz, 1/3 rated power
Muting Function MIC 1~4 overrides other input signals with 30 dB attenuation.

Set the priority for MIC1~4 by the “MIC PRIORITY” switch on the rare panel ( Priority function available when it is”ON”, the priority will be on lower level same as AUX input when it is “OFF”)

Gain Control ±2.5mV~±75mV at 30dB
Crosstalk ≤50dB
Phantom Power +48V with LED indicator
Chime 2 tone and 4 tone options
Cooling Fan automatically start up when temp reaches 55℃ ( Equipment below 120W will convect and cool button-up)
Protection High temp, overload & short-circuit
Power Supply ~110V-230V 50/60Hz
Power Consumption 400W
Dimensions 484 x 358 x 88mm
Weight 13.52Kg
Finish Panel: aluminum plate, black

Case: SPCC Panel